产品详情
Product Name: Ameriform DFL Dry Coating
Product code: AF35B
Appearance: White translucent
Type: Enhanced Stamping on various metal substrates.
Substrates: CRS, HRS&PO, Aluminum, Stainless Steel, EG, GA, and HDG metallic substrate.
Note: All these substrates will be cleaned of oiled before coating with Ameriform and dried.
RoHS Compliant: Yes
Physicals:
Metal Surface: Surface to be coated should be cleaned, rinsed, and dried before coating.
Dry Film Thickness: 75-300 mg/sqft*
Application Method: Roll coating reverse or direct (reverse application is preferred method)
Coefficient of friction: 0.09-0.06 Impact, Reverse: No Pick
T-Bend: N/A PMT: N/A
MEK Resistance: N/A pH: N/A
Gloss @ 60 deg: N/A Specific Gravity: N/A
Solid By weight: N/A Solids by Volume: N/A
Weldability: Yes
Weld Odor: Acrylic
Topcoat compatibility: No
Corrosion Resistance: Corrosion residence of this product is based on barrier type protection and is not intended to be used as a passivation.
Secondary Processing Information:
The application of oil intentionally or by error should not be done without a Chemcoaters representative’s approval. The application of oil will often cause the Ameriform coating to exhibit a higher COF than is needed and fail stamping.
Product is designed to be removed from the metal surface with an alkaline cleaner. Do not use straight water or acid type cleaners.
